Popular
-
Soundproof Box (Anti-noise case) for ASIC Miners
350€
-
3D Printed Exhaust Duct with Soundproofing Foam for ASIC Miners
35€
-
Radial Fan for ASIC Miners – Quiet Cooling Solution
189€
-
Control Board for ASIC Miners – Multiple Models Available
90€
-
Fan Emulator / Simulator for ASIC Miners (Immersion Cooling)
3€
Soundproof Box (Anti-noise case) for ASIC Miners
350€
The soundproof box is designed to significantly reduce noise from ASIC cryptocurrency miners, making mining setups more suitable for home use or separate indoor spaces. It can reduce noise by up to 90% on its own and up to 98% when combined with soundproofing ducts on the air intake and exhaust.
- High noise reduction: Up to 90% with the box alone or up to 98% when combined with soundproofing ducts.
- Flexible positioning: Can be installed horizontally or vertically to suit your available space.
- Temperature management: The miner’s operating temperature may increase by approximately 4–6°C when enclosed.
- Improved noise control: For the best results, use soundproofing ducts at both the air intake and exhaust.
Video demonstration: Watch on YouTube
Keywords: soundproof box, soundproof enclosure, noise reduction, ASIC miner, mining noise reduction, noise insulation, acoustic enclosure
| Dimensions | 120 × 49 × 52 cm |
|---|---|
| Noise reduction – box only | Up to 90% |
| Noise reduction – box with soundproofing ducts | Up to 98% |
| Installation position | Horizontal or vertical |
| Temperature increase | Approximately 4–6°C, depending on operating conditions |
The soundproof box is designed to reduce noise from ASIC cryptocurrency miners by up to 90%, or up to 98% when combined with soundproofing ducts. Measuring 120 × 49 × 52 cm, it can be positioned horizontally or vertically to suit your space. The miner's operating temperature may increase by approximately 4–6°C, depending on the setup.
Related products
-
Fan Emulator / Simulator for ASIC Miners (Immersion Cooling)
3€Add to cartThe Fan Emulator / Simulator allows ASIC miners to operate without their original cooling fans by simulating their presence and fan speed signals. It helps prevent fan error messages and maintain stable miner operation when using immersion cooling or external cooling solutions.
Ideal for immersion cooling systems and setups using external radial fans, where the original miner fans are removed. Simply connect the emulator to the compatible fan connector to simulate fan feedback without complex modifications.
Key Benefits
- Fan error prevention: Simulates fan feedback when original fans are removed.
- Immersion cooling compatibility: Suitable for compatible ASIC miners operating in immersion cooling systems.
- Reduced fan noise: Eliminates noise from the original fans when used with an appropriate external cooling setup.
- Simple installation: Connects to the compatible fan header without complex modifications.
Important: Compatibility depends on the miner model, fan connector and signal requirements. Verify compatibility before ordering. A fan emulator does not replace the cooling system itself; adequate heat removal is still essential for safe miner operation.
keywords: Fan simulator, fan emulator, ASIC cooling, immersion cooling, external cooling, Antminer fan simulator, Whatsminer fan emulator, ASIC miner cooling bypass, RPM simulator, mining coolant, ASIC cooler
-
3D Printed Exhaust Duct with Soundproofing Foam for ASIC Miners
35€Add to cartThe 3D-printed exhaust duct with soundproofing foam is designed to reduce noise from the exhaust side of ASIC cryptocurrency miners by approximately 25%. It is an affordable, easy-to-install solution for reducing mining noise, especially when the miner is located in a separate room.
- Noise reduction: Reduces noise from the exhaust side of the miner by approximately 25%.
- Easy installation: Fits onto the rear exhaust side without requiring modifications to the miner.
- Targeted sound dampening: Designed to reduce noise where it is most noticeable, while leaving the front intake side unobstructed.
- Custom sizing: Dimensions can be adjusted to fit specific ASIC miner models using custom 3D printing.
Video demonstration: Watch on YouTube
Keywords: 3D printed exhaust duct, soundproofing foam, exhaust duct, noise reduction, sound dampening, ASIC miner, soundproofing solution
-
Radial Fan for ASIC Miners – Quiet Cooling Solution
189€Add to cartThe radial fan is designed to reduce noise from ASIC cryptocurrency miners by replacing the original cooling fans with a single high-performance external fan. It provides a quieter cooling solution for mining setups while maintaining airflow through the miner.
- Reduced noise: Can reduce operating noise by approximately 50–80% compared to the original fan setup.
- Lower power consumption: Features its own power supply and can consume less energy than the original cooling configuration, depending on operating speed.
- Easy installation: Connects to the miner using the included adapter and plugs into a separate power outlet.
- Compact design: Measures 28 × 28 × 16 cm, including the mounting adapter.
Video demonstration: Watch on YouTube
Keywords: radial fan, quiet cooling, noise reduction, ASIC miner, silent mining, mining fan, noise reduction solution
-
Control Board for ASIC Miners – Multiple Models Available
90€Add to cartBrand-new control boards for a wide range of ASIC cryptocurrency miners. Compatible boards are available for selected models from Bitmain, IceRiver, Canaan Avalon, Goldshell, MicroBT Whatsminer, DragonBall and other manufacturers.
Compatible models include:
- Bitmain Antminer: Z15, L7, L9, S17, S19, S21, KS3, KS5, AL1, K7, D9, E9, HS3, KA3, DR7, X5 and others.
- IceRiver: KS0, KS1, KS2, KS3, KS5, AL0, AL1 and others.
Need help finding the right control board?
Contact us by phone or email to confirm compatibility with your specific ASIC miner model.
