Showing all 14 results

• 

  Bitmain ANTRACK V2 24 kW (Hydro Mining System) for ASIC Miners

  Price on Request

  The Bitmain ANTRACK V2 is a professional hydro mining system with a separate external cooling unit, designed for compatible liquid-cooled ASIC miners. It includes a mining cabinet, water pump and external cooler, with a specified maximum cooling capacity of 24 kW. The system accommodates up to four compatible Antminer Hydro units or two compatible U3 Hydro units. Contact us before ordering to confirm hardware compatibility and installation requirements.

• 

  Bitmain ANTRACK V1 24 kW (Hydro Mining Rack) for ASIC Miners

  2 950€

  The Bitmain ANTRACK V1 is an integrated hydro mining rack designed to accommodate up to four compatible hydro-cooled ASIC miners. It features a built-in pump, heat exchanger, fans and closed-loop liquid-cooling system, with a specified maximum cooling capacity of 24 kW. Designed for professional mining installations, it combines miner housing and cooling in one cabinet. Contact us to confirm compatibility and installation requirements before ordering.

  Add to cart
• 

  ASIC Miner Conversion from Air Cooling to Hydro Cooling

  150€

  Convert your ASIC miner from air cooling to hydro cooling for quieter operation.

  This custom conversion replaces the miner’s original air-cooling system with a liquid-based hydro-cooling solution. It can significantly reduce operating noise and may allow you to reuse the heat generated by the miner for applications such as heating a swimming pool or hot water tank.

  Key Benefits

  • Reduced noise: Replace loud air cooling with a quieter hydro-cooling solution.
  • Heat recovery: Potentially reuse waste heat for heating water, a swimming pool or other suitable applications.
  • Cooling performance: A properly designed cooling system can help maintain suitable operating temperatures and may benefit hardware longevity.
  • Custom conversion: Each conversion is assessed according to the miner model and the intended cooling setup.

  Important Information

  This is a custom conversion service, not a standalone cooling device. Compatibility, conversion details, expected noise reduction and installation requirements depend on the miner model and the intended cooling system.

  Please contact us before ordering to confirm whether your ASIC miner can be converted and to discuss the available options. We will provide detailed specifications and further information upon request.

  Keywords: ASIC miner hydro cooling, air to hydro conversion, ASIC miner cooling conversion, liquid cooling for ASIC miners, quiet ASIC miner cooling, silent crypto mining, ASIC noise reduction, hydro cooling conversion service, water cooling for cryptocurrency miners, ASIC heat recovery, Bitcoin miner cooling, custom ASIC cooling solution

  Add to cart
• 

  Bitmain APW17 PSU 12–15V EMC, 3600W for Antminer

  310€

  The Bitmain APW17 EMC power supply (PSU) is a 3,600 W power supply designed for selected Bitmain Antminer ASIC miners. It supports an output voltage range of 12–15 V and is intended for compatible mining hardware.

  Compatible models:

  • Bitmain Antminer: S21 / S19j XP / KS5 / KS5 Pro / AL1 / L9

  Keywords:Bitmain APW17, APW17 EMC power supply, Antminer power supply, 3600W PSU, 12V 15V power supply, ASIC miner power supply, Antminer S21 PSU, Antminer S19j XP power supply, Antminer KS5 PSU, Antminer KS5 Pro power supply, Antminer AL1 PSU, Antminer L9 power supply, cryptocurrency mining PSU, ASIC PSU replacement

  Add to cart
• 

  Bitmain APW12+ PSU 14–17V, 3600W for Antminer

  190€

  The Bitmain APW12+ power supply (PSU) is a 3,600 W power supply designed for selected Bitmain Antminer models. It provides power for compatible ASIC mining hardware and features an output voltage range of 14–17 V.

  Compatible models:

  • Bitmain Antminer: S19 / KA3 / L7 / K7 / DR7 / HS3

  Keywords: Bitmain APW12+, APW12+ power supply, Antminer power supply, 3600W PSU, 14V 17V power supply, ASIC miner power supply, Antminer S19 PSU, Antminer KA3 power supply, Antminer L7 PSU, Antminer K7 power supply, Antminer DR7 PSU, Antminer HS3 power supply, cryptocurrency mining PSU, ASIC PSU replacement

  Add to cart
• 

  Bitmain APW7 PSU 12V, 1800W for Antminer

  110€

  The Bitmain APW7 power supply (PSU) is an 1,800 W power supply designed for selected Bitmain Antminer models. It provides reliable power for compatible ASIC mining hardware and is suitable for several Antminer models used for different cryptocurrencies.

  Compatible models:

  • Bitmain Antminer: Z15 / S9 / S9e / S9k / Z11 / Z11 Pro / L3 / L3+ / D3 / E3 / Z9

  Keywords: Bitmain APW7, APW7 power supply, Antminer power supply, 1800W PSU, 12V power supply, ASIC miner power supply, Antminer S9 PSU, Antminer Z15 power supply, Antminer Z11 PSU, Antminer L3+ power supply, Antminer D3 PSU, Antminer E3 power supply, Antminer Z9 PSU, Bitcoin mining power supply, ASIC PSU replacement

  Add to cart
• 

  Bitmain APW12 PSU 12–15V, 3600W for Antminer

  180€

  The Bitmain APW12 power supply (PSU) is a 3,600 W power supply designed for selected Bitmain Antminer models. It provides power for compatible mining hardware and is suitable for supported models in the Antminer E9, T19 and S19 series.

  Compatible models:

  • Bitmain Antminer: E9 / T19 / S19 / S19 Pro / S19j / S19j Pro

  Keywords: APW12 power supply, Bitmain APW12, Antminer power supply, 3600W PSU, ASIC miner power supply, Antminer S19 power supply, Antminer S19 Pro PSU, Antminer S19j power supply, Antminer T19 PSU, Antminer E9 power supply, Bitcoin mining power supply, ASIC PSU replacement

  Add to cart
• 

  Hydro Cooler for ASIC Miners – 12 kW Cooling Capacity

  599€

  The Hydro Cooler is an external liquid cooling unit designed for water-cooled ASIC cryptocurrency miners. It removes heat through circulating coolant and supports efficient thermal management for high-performance mining hardware.

  It is suitable for compatible Bitcoin mining models, including the Antminer S19 Hydro, S21 Hydro and S23 Hydro series, as well as MicroBT Whatsminer M63 and M73 models. Compatible Litecoin and Dogecoin miners, such as the Antminer L9 Hydro and L11 Hydro, may also be supported, depending on the specific configuration.

  Available versions:

  • 12 kW cooling capacity: Designed for miners with a heat load of approximately 11–12 kW.
  • 4–4.5 kW cooling capacity: Also available for lower-power hydro miners.

  Important recommendation: Hydro cooling systems require careful setup and compatibility checks. Please contact us before purchasing a hydro miner or cooler so we can help you choose a suitable configuration.

  Add to cart
• 

  Soundproof Box (Anti-noise case) for ASIC Miners

  350€

  The soundproof box is designed to significantly reduce noise from ASIC cryptocurrency miners, making mining setups more suitable for home use or separate indoor spaces. It can reduce noise by up to 90% on its own and up to 98% when combined with soundproofing ducts on the air intake and exhaust.

  • High noise reduction: Up to 90% with the box alone or up to 98% when combined with soundproofing ducts.
  • Flexible positioning: Can be installed horizontally or vertically to suit your available space.
  • Temperature management: The miner’s operating temperature may increase by approximately 4–6°C when enclosed.
  • Improved noise control: For the best results, use soundproofing ducts at both the air intake and exhaust.

  Video demonstration: Watch on YouTube

  Keywords: soundproof box, soundproof enclosure, noise reduction, ASIC miner, mining noise reduction, noise insulation, acoustic enclosure

  Add to cart
• 

  3D Printed Exhaust Duct with Soundproofing Foam for ASIC Miners

  35€

  The 3D-printed exhaust duct with soundproofing foam is designed to reduce noise from the exhaust side of ASIC cryptocurrency miners by approximately 25%. It is an affordable, easy-to-install solution for reducing mining noise, especially when the miner is located in a separate room.

  • Noise reduction: Reduces noise from the exhaust side of the miner by approximately 25%.
  • Easy installation: Fits onto the rear exhaust side without requiring modifications to the miner.
  • Targeted sound dampening: Designed to reduce noise where it is most noticeable, while leaving the front intake side unobstructed.
  • Custom sizing: Dimensions can be adjusted to fit specific ASIC miner models using custom 3D printing.

  Video demonstration: Watch on YouTube

  Keywords: 3D printed exhaust duct, soundproofing foam, exhaust duct, noise reduction, sound dampening, ASIC miner, soundproofing solution

  Add to cart
• 

  Radial Fan for ASIC Miners – Quiet Cooling Solution

  189€

  The radial fan is designed to reduce noise from ASIC cryptocurrency miners by replacing the original cooling fans with a single high-performance external fan. It provides a quieter cooling solution for mining setups while maintaining airflow through the miner.

  • Reduced noise: Can reduce operating noise by approximately 50–80% compared to the original fan setup.
  • Lower power consumption: Features its own power supply and can consume less energy than the original cooling configuration, depending on operating speed.
  • Easy installation: Connects to the miner using the included adapter and plugs into a separate power outlet.
  • Compact design: Measures 28 × 28 × 16 cm, including the mounting adapter.

  Video demonstration: Watch on YouTube

  Keywords: radial fan, quiet cooling, noise reduction, ASIC miner, silent mining, mining fan, noise reduction solution

  Add to cart
• 

  Control Board for ASIC Miners – Multiple Models Available

  90€

  Brand-new control boards for a wide range of ASIC cryptocurrency miners. Compatible boards are available for selected models from Bitmain, IceRiver, Canaan Avalon, Goldshell, MicroBT Whatsminer, DragonBall and other manufacturers.

  Compatible models include:

  • Bitmain Antminer: Z15, L7, L9, S17, S19, S21, KS3, KS5, AL1, K7, D9, E9, HS3, KA3, DR7, X5 and others.
  • IceRiver: KS0, KS1, KS2, KS3, KS5, AL0, AL1 and others.

  Need help finding the right control board?

  Contact us by phone or email to confirm compatibility with your specific ASIC miner model.

  Add to cart
• 

  Fan Emulator / Simulator for ASIC Miners (Immersion Cooling)

  3€

  The Fan Emulator / Simulator allows ASIC miners to operate without their original cooling fans by simulating their presence and fan speed signals. It helps prevent fan error messages and maintain stable miner operation when using immersion cooling or external cooling solutions.

  Ideal for immersion cooling systems and setups using external radial fans, where the original miner fans are removed. Simply connect the emulator to the compatible fan connector to simulate fan feedback without complex modifications.

  Key Benefits

  • Fan error prevention: Simulates fan feedback when original fans are removed.
  • Immersion cooling compatibility: Suitable for compatible ASIC miners operating in immersion cooling systems.
  • Reduced fan noise: Eliminates noise from the original fans when used with an appropriate external cooling setup.
  • Simple installation: Connects to the compatible fan header without complex modifications.

  Important: Compatibility depends on the miner model, fan connector and signal requirements. Verify compatibility before ordering. A fan emulator does not replace the cooling system itself; adequate heat removal is still essential for safe miner operation.

  keywords: Fan simulator, fan emulator, ASIC cooling, immersion cooling, external cooling, Antminer fan simulator, Whatsminer fan emulator, ASIC miner cooling bypass, RPM simulator, mining coolant, ASIC cooler

  Add to cart
• 

  Cooling Fan for ASIC Miner (12 × 12 × 3.8 cm)

  15€

  4-Pin Cooling Fan for ASIC Miners – 12 × 12 × 3.8 cm (Other Sizes Available)

  Brand-new 4-pin cooling fan for ASIC miners. Compatible with a wide range of mining hardware from various manufacturers.

  Available sizes (width × height):

  • 12 × 12 cm, 8 × 8 cm, 6 × 6 cm and 4 × 4 cm, available in different thicknesses – see “Specifications”.

  Compatible with:

  • Most Antminer models, including S19 / Z15 / L7 / E9 / T19 / L3 / DR5 / D7 / S17 / T17 / S9 and others.
  • Most miners from Goldshell / iBeLink / Innosilicon and other manufacturers. Contact us to confirm compatibility with your specific model.

  Not compatible with:

  • Whatsminer miners, which require a 6-pin fan connector.

  Add to cart